View topic - Anyone a camera designer/manufacturer?
Underwater Photography Guide Forums
All Things Underwater Photography
Long ago I did the SLR Ikelite housing, tray and off-center mounted strobe bit. The dive gear and camera pre-dive check list was like a space shuttle launch! I've more recently acquired a Canon D10 and later a Pentax WG-1 with an added Eye-Fi WiFi card that downloads the pics to a laptop or iPad.
I can't understand why camera developers have not targeted the large number of divers, kayakers, surf and paddle boarders with a dedicated mirrorless waterproof camera with a moderate wide-angle (28mm) lens, and wireless SD memory card. Put a fiberoptic coupler over the flash lens to after-market a strobe on an arm. In other words, the less the user opens the case, the less chance of flooding. Simple design, cheaper manufacturing cost. Magnetic recharg batteries are slow and interchangeable would be better, but the battery compartment is easily sealed from the rest of the inner workings. If it floods, it's not fatal to the camera.
- Posts: 1
- Joined: Wed Jun 06, 2012 10:39 am
A clip sealed battery compartment would work well and could house the SD card. you can buy Waterproof cards now to save data when there flooded and making a sealed battery compartment which would result in minimal clean up if flooded would be easy enough.
Lenses is your big issue. having a lens setup it would need to be in a port that would put a level of failure.
There reason im assuming on this is cost.
- Posts: 2
- Joined: Tue Jun 05, 2012 9:53 am
Who is online
Users browsing this forum: No registered users and 4 guests