Underwater Photography Guide Forums
All Things Underwater Photography
Also how do you attach the strobe to the tripod? Is there a way to attach a ball head base to the tripod and then connect with a clamp?
- Posts: 188
- Joined: Thu May 13, 2010 5:50 am
- Location: Alexandria, Virginia
smb2 wrote:The Z 220/240s are positively buoyant. Is the tripod heavy enough to keep them planted?
When using a third strobe remotely, I Duck tape a two pound soft weight to the strobe.
You must have pretty salty water in Curacao, here in Los Angeles, my Z240 with batteries and a ULCS adapter are a bit negative. In any case, I do put about 300 grams (little less than 3/4 pound) on the legs but more for surge protection than bouyancy. The gorillapod that I have is a bit negative as well but with a strobe on top it is a bit whippy in surge, hence the weights.
Bill Van Antwerp Canon/Nauticam/Subal/Inon Lots of glass
Technical Advisor to Bluewater Photo
- Posts: 309
- Joined: Wed May 12, 2010 4:16 pm
- Location: Los Angeles (more or less)
I used an Inon s-2000 although an Inon Z-240 would be about the same. The snoot, fully assembled except for the unit that hold color filters is a Seahorn XS. The tripos is a Gorellapod DSLR. Also not the long fibreoptic cable which was a special order from Reef Photo.
The mounting screw on the GorillaPod is not long enough to engage the threads on the S2000 although at first glance it does appear to engage. The solution is either modify the Srtobe, modify the snoot or get a longer screw. I chose to grind off the soft pad on the Gorilla pad's mounting clip because there is another soft pad on the strobe.
What is the bouyancy of this contraption. I don't know.
- Posts: 19
- Joined: Sat Mar 19, 2011 9:42 am
Who is online
Users browsing this forum: No registered users and 5 guests