Underwater Photography Guide Forums
All Things Underwater Photography
Although the 90DX provides a TTL function I gather it only operates in TTL mode with a sync cable and appropriate housings. Not mine. So it looks as if the TTL setting won't work with the Canon. Am I wrong?
The remainings strobe settings are:-
One for cameras with a pre-flash setting.
One for cameras without a pre-flash setting.
I dont think - tell me if I am wrong - that the IXUS has a preflash setting.
It looks as I have to use the strobe in a purely manual role and on a trial and error basis adjusting the Control dial and guide number until i get an acceptable exposure.
All recommendations as to appropriate settings and general advice very welcome.
Richard, South West England.
- Richard Blair
- Posts: 2
- Joined: Thu Oct 20, 2011 5:26 am
I would not bother about TTL as this is not very useful in UW photography. Setting your strobe manually gives better results in the end. You should play around with your strobe power and the aperture of your camera to get the best lighting for anything that will be covered by the strobe light. You use your exposure to control ambient light (short exposures give dark backgrounds longer exposures will show more background).
Good luck Leendert
- Leendert Smit
- Posts: 12
- Joined: Fri Sep 03, 2010 6:33 am
- Location: The Netherlands
Who is online
Users browsing this forum: No registered users and 3 guests