D300 ISO Settings And WB/Strobes Temperature!!!

Ask about gear, cameras, lenses, technique or lighting

Moderators: tswinner, bvanant

Postby Salil Sahani » Tue Jun 08, 2010 3:57 am

Hello Everybody,

Can Anyone Please Tell Me How High Can We Bump Up The ISO on D300 And Still Get High Quality ( No Grains ) Photos ?

Also Do We Set the K Temperature on D300 According to The Strobe Temperature Or Keep the WB on Auto ?
Salil S Sahani
Wildlife Photographer Freelance
http://salilsahaniphotography.com
User avatar
Salil Sahani
 
Posts: 86
Joined: Wed May 12, 2010 5:57 am

Postby smb2 » Tue Jun 08, 2010 8:55 am

From what I have read ISO of 800-1600 should not be a problem. I have not shot with a D300 though.

I set my D2x to Auto or cloudy day.
I post process with Aperture 2 and can set the WB on the RAW image as needed, usually adjusting to around 5000k (which corresponds to my flash).
User avatar
smb2
 
Posts: 188
Joined: Thu May 13, 2010 5:50 am
Location: Alexandria, Virginia

Postby Salil Sahani » Tue Jun 08, 2010 9:39 am

Thankyou Sir

From What I Have Seen Depending on the Available Light On D300 You can Bump More than Max. 400 ISO

But I Need to Confirm that
Salil S Sahani
Wildlife Photographer Freelance
http://salilsahaniphotography.com
User avatar
Salil Sahani
 
Posts: 86
Joined: Wed May 12, 2010 5:57 am

Postby scottg » Tue Jun 08, 2010 9:20 pm

ISO 800, Auto white balance

Scott Gietler Owner/Editor, Underwater Photography Guide & Bluewater Photo http://www.uwphotographyguide.com http://www.bluewaterphotostore.com

User avatar
scottg
Site Admin
 
Posts: 491
Joined: Sun May 09, 2010 10:31 am
Location: Marina del rey, CA

Postby Salil Sahani » Wed Jun 09, 2010 1:20 am

Thankyou Very Much Sir :)!!!
Salil S Sahani
Wildlife Photographer Freelance
http://salilsahaniphotography.com
User avatar
Salil Sahani
 
Posts: 86
Joined: Wed May 12, 2010 5:57 am


Return to Underwater Photography Questions

Who is online

Users browsing this forum: No registered users and 4 guests

cron