Sea & sea housing / Canon lens question
5 posts
• Page 1 of 1
by LancerSA » Wed May 23, 2012 5:21 am
Hi everyone, please would you give some advise here: I have an RDX 500d housing with a flat standard port. I am using a Canon 450 d camera.
I am looking into purchasing a macro lens and know the 60mm lens will fit but will a Canon EF 100 mm f 2.8 USM MACRO lens fit in this housing without hitting the glass ?
I would appreciate any input at all.
Thanks
I am looking into purchasing a macro lens and know the 60mm lens will fit but will a Canon EF 100 mm f 2.8 USM MACRO lens fit in this housing without hitting the glass ?
I would appreciate any input at all.
Thanks
- LancerSA
- Posts: 3
- Joined: Thu Jan 20, 2011 11:10 pm
by Zig » Thu May 24, 2012 8:05 am
You will most likely need a 40mm extension ring. I shoot my Nikon 60mm in the NX Macro port, and I need the 40mm extension ring for my Nikon 105mm macro lens.
Call or email the guys at Bluewater Photo (www.bluewaterphotostore.com). They shoot Sea & Sea, and will be able to tell you for sure.
Call or email the guys at Bluewater Photo (www.bluewaterphotostore.com). They shoot Sea & Sea, and will be able to tell you for sure.
Michael Zeigler Editor - Underwater Photography Guide http://www.uwphotographyguide.com http://www.seainfocus.com
-
Zig - Posts: 106
- Joined: Wed May 12, 2010 9:26 am
- Location: Huntington Beach, CA
by bvanant » Sun May 27, 2012 4:18 pm
The standard port is 90 mm long and the recommended port (the 111) is 127 so a 40 mm extension is perfect.
Bill
Bill
Bill Van Antwerp Canon/Nauticam/Subal/Inon Lots of glass
Technical Advisor to Bluewater Photo
-
bvanant - Posts: 309
- Joined: Wed May 12, 2010 4:16 pm
- Location: Los Angeles (more or less)
5 posts
• Page 1 of 1
Return to Underwater Photography Questions
Who is online
Users browsing this forum: No registered users and 1 guest