Intova IC600 Best Practices?
Moderators: bvanant, CompuDude, James
1 post
• Page 1 of 1
by DS256 » Thu Apr 28, 2011 5:39 pm
I recently added an external Pixtreme flash kit which works well however I am looking for insights from others.
Uploading the pictures, I noted that the flash seems to be sync to 1/30 of a second which seems slow to me. Given the ISO is not stated I'm wondering if there is a problem with the camera information stored with the picture.
I'm trying to figure out how to force the flash without washing out the picture. If I set the flash always on in automatic mode, I can get severe over exposure. In most cases I simply leave everything on automatic but that means I have colour correction to on pictures below 15 feet.
What I really need is to spend a bit of time trying different combinations of ISO and flash however my wife's tolerance of my photography while we dive would be severely tested.
Thanks
Uploading the pictures, I noted that the flash seems to be sync to 1/30 of a second which seems slow to me. Given the ISO is not stated I'm wondering if there is a problem with the camera information stored with the picture.
I'm trying to figure out how to force the flash without washing out the picture. If I set the flash always on in automatic mode, I can get severe over exposure. In most cases I simply leave everything on automatic but that means I have colour correction to on pictures below 15 feet.
What I really need is to spend a bit of time trying different combinations of ISO and flash however my wife's tolerance of my photography while we dive would be severely tested.
Thanks
- DS256
- Posts: 2
- Joined: Wed Apr 27, 2011 4:36 pm
1 post
• Page 1 of 1
Return to Compact Camera Corner
Who is online
Users browsing this forum: No registered users and 1 guest