Underwater Photography Guide Forums
All Things Underwater Photography
I have a question regarding my RDX450 housing. In general I'm quite happy with it; however, I'm having intermittent issues with the shutter lever. Occasionally, it simply won't engage the camera. This requires taking the camera out of the housing playing around with it and after several attempts it will eventually fire. This is happening more and more frequently. To the naked eye, I'm not correcting any obvious positioning/placement issue - I was thinking that the problem might be with the small pin that contacts the shutter button but I'm not sure- has anyone experienced or heard of this issue?
- Posts: 1
- Joined: Wed Oct 03, 2012 7:39 am
- Location: Durham NC
Occationally I experience the same problem with my RDX 550 housing, but it has never been a serious problem.
I usually have to adjust the baseplate very precisely to get it to work - again it is no big problem, as I fire of a couple of test shoots before I close the housing.
I have thought about raising the baseplate a fraction on the right side with a small piece of paper.
- Posts: 1
- Joined: Fri Aug 19, 2011 12:47 pm
Who is online
Users browsing this forum: No registered users and 6 guests